IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 175 / 1665

WindO/I-NV4 User’s Manual
3-69
5 User Communication
3
Communic
ation
Registering Constant (Character)
The received data is compared with the registered character data and the number of the matching character data is
stored in the device address.
This can be configured only when
RXD is selected as Type on the Command Settings dialog box, and Registering
Constant (Character) is selected under Type on the Data Settings dialog box.
■
Number of Registering Constants
Specify the number of data of the registered character data (1 to 100).
■
Registering Constants
■
Index
Specify the Index No. (0 to 65535) of the character data.
■
Data
Enter the character data (1 to 1500 bytes) to be registered. The size of a single-byte character is one byte and that of
a double-byte character is two bytes.
The character data of different size or the same data with a different number cannot be registered.
■
Set
Register the Index and Data settings to the list. When a number that is already registered is selected, it is
overwritten with the new setting.
■
Insert
Insert a character data setting to the selected number in the list.
Click this button to insert the
Index and Data setting. The settings at the insertion point shift down 1 line. Settings
cannot be inserted when all numbers are already set.
■
Delete
Delete the selected settings from the list.
■
Index Device Address
Specify the word device for storing the Index No. of the character data matching the received data. You can only
specify an internal device.
Click to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 “5.1 Device
Address Settings” on page 2-68.
No.: Shows the ID No. (1 to 100) of the character data.
Index: Shows the Index No. of the character data.
Data: Shows the character data.