manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1409 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 1409

WindO/I-NV4 User’s Manual

28-61

4 E-mail Function

28

Maintenance

E-mail Group Dialog Box

Creates an E-mail Group or edits an existing E-mail Group.

■

Group Name

Enter a name of the E-mail Group. The maximum number is 60 characters. Only alphanumeric characters and 
symbols can be used.

■

Comment

Enter a comment for the E-mail Group. The maximum number is 80 characters.

■

E-mail address list

■

>>

Assigns the e-mail address displayed in the 

E-mail address list

 to the 

Members

.

■

<<

Deletes the e-mail addresses assigned to the 

Members

.

■

Members

Find:

The text entered is searched for 

People

 in the 

E-mail address list

.

People:

The e-mail addresses registered in the E-mail Address Book dialog box are displayed in this list.

To select multiple e-mail addresses, press and hold SHIFT or CTRL while you click the specific items.

Comment:

Displays the comment for the e-mail address.

Find:

The text entered is searched for 

People

 in the 

Members

.

People:

The e-mail addresses assigned to a member of E-mail Group are displayed in this list.

To select multiple e-mail addresses, press and hold SHIFT or CTRL while you click the specific items.

Comment:

Displays the comment for the e-mail address.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments