manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1120 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 1120

2 Editing and Management of the Script

20-10

WindO/I-NV4 User’s Manual

Importing script

1

On the 

Configuration

 tab, in the 

Manager

 group, click 

Script Manager

.

Script Manager opens.

2

Click 

Import

.

Open

 dialog box is displayed.

3

Select a file for the Script, and then click Open.
The script is added to the Script Manager.

If there is a script with a script ID already registered on the Script Manager, an overwrite confirmation 
message is displayed.

• Click 

Yes

 to overwrite the script displayed in the confirmation message.

• Click 

Yes To All

 to overwrite all the scripts.

• Click 

No

 to display the next confirmation message without overwriting the script displayed in the 

confirmation message.

• Click 

Cancel

 to stop importing scripts.

To import multiple scripts, select all of the script files to import. To select multiple script files, press and hold 
SHIFT or CTRL while you click the specific items.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments