SK638
www.idealinc.com
PORTABLE BLACK OUT & POWER FAILURE
EMERGENCY LIGHT
EMERGENCY LIGHTING IS AN IMPORTANT
PART OF EVERY HOME SAFETY PLAN
Don't get left in the dark!
This slim easy-to-install emergency light can quickly add safety and convenience
to your home, cottage, or business.
FEATURES
• When the unit is plugged into a 110 volt outlet, a blackout or power failure
will automatically turn on the light when the control switch is set to either
FULL LIGHT or HALF LIGHT.
In FULL LIGHT mode, all six, 0.5W, LED’s will be powered on.
A fully charged battery will provide up to 4 hours of light.
In HALF LIGHT mode, three, 0.5W, LED’s will be powered on.
A fully charged battery will provide up to 8 hours of light.
• With the NIGHT LIGHT control switch is set to AUTO a built in photocell sensor
automatically turns on a single LED for a soft glow night light when dark and
turns off when enough light is detected.
• Built-in maintenance free, rechargeable 6 volt lead acid battery.
• Low power consumption - long battery life.
• 6 Long life 0.5 watt LEDs, no need to replace bulbs.
• CHARGE / POWER indicator LED indicates that the unit is receiving power.
• UL (USA) approved power adapter.
Save these instructions for future reference.
INSTALLATION
Connect the adapter to the light and then plug the adapter into a standard 120 V
outlet to charge the battery. The battery requires 48 hours to reach a full charge
and provide maximum service. The “CHARGE / POWER” LED will stay lit as long as
the unit is connected to an outlet and receiving power.
It is safe to leave the unit plugged in. The built in battery protection circuits prevent
the battery from being over charged.
This unit can be mounted on a wall, ceiling, or placed on a shelf in either
a horizontal or vertical position.
To mount on a wall or ceiling using the keyhole slots on back plate:
• Place the 2 screws (with anchors) provided in the wall (template below).
Do not tighten the screws in completely.
• Place the light in desired position by lining up the screws with the hanging holes
on the back of the unit.
NOTE:
If the unit is left unplugged it should be recharged every 3 months
for 48 hours to maintain battery life.
OPERATION
1. Set Emergency functions
The EMERGENCY control button selects how the unit will function during a power
failure. There are 3 settings: "FULL LIGHT" ,"HALF LIGHT" or "OFF".
•
FULL LIGHT
- 6 x 0.5W bright LED’s come on when power fails.
(provides up to 4 hours of light on a full charge)
•
HALF LIGHT
- 3 x 0.5W bright LED’s come on when power fails.
(provides up to 8 hours of light on a full charge)
•
OFF
- No LED’s will function, the light will remain off
2. Set the night light function
(Uses one LED for a soft night light)
The Night Light control switch selects how the unit will react when the photocell
detects the absence of light. There are 3 settings, ON, AUTO, OFF.
•
ON
- A single LED night light - constant on.
•
AUTO
- The built in photocell sensor will activate a single LED night light at
night (dusk) and turn it off at dawn.
•
OFF
- Turns the night light off. The built in photocell sensor will not activate the
night light feature.
• The Night Light feature provides up to 100 hrs. of light during a power failure.
3. TEST function
The TEST button simulates a power failure condition while the unit is plugged in.
Press to verify that the unit will perfom as expected.
WARNING: Do not look into or point the light into anyone’s eyes.
MAINTENANCE
• The unit contains a sealed lead acid battery and long life LED bulbs.
It is designed to be maintenance free.
• The unit is designed to be left plugged into a wall outlet in order to detect
power failures and provide emergency light. The internal battery regulator
will prevent over charging and maintain battery life.
• If the unit is used as a temporary portable light or flash light, it should be
recharged after each use.
• If this unit is left unplugged, the unit needs to be fully re-charged every
3 months to maintain battery life and ensure a full charge when needed.
The unit must be plugged in for 48 hours for a full charge.
Attach the included sticker to the side of the unit to record the charge dates.
• Not for permanent exterior applications. If used for temporary outdoor
illumination protect the unit from the elements.
Do not expose the unit or the adapter to wet or damp areas.
• Do not mount near gas or electric heaters.
• Do not let unit, power cord or adapter touch hot surfaces.
• The use of extension cords or accessory equipment is not recommended by the
manufacturer as they may cause unsafe operating conditions.
• Servicing of this unit is limited to replacing the battery.
• Do not use this unit for other then its intended use.
• Battery: 6V lead batteries must be disposed of properly. This rechargeable
battery has a long life when cared for as instructed. When the battery no
longer maintains its charge it should be removed and sent to recycling per
your local regulations.
WARRANTY:
This light is warranted to be free of defective materials and workmanship for a
period of one year from date of purchase. In case of malfunction, this unit will be
repaired or replaced at no charge by Ideal Security Inc. Return the product
postage paid, along with your sales slip to Ideal Security Inc., 7111 Cordner
Street, Lasalle, Quebec, Canada, H8N2J7. Warranty begins on date of consumer
purchase. Repair or replacement as described above shall be the sole remedy to
the consumer and there shall be no liability on the part of Ideal Security Inc. for
any special, indirect, incidental or consequential damages, including but not
limited to any loss of business or profits whether or not foreseeable.
Customer Service:
Tel: 800-361-2236 x 230 • Fax: 800-361-3423
e-mail: [email protected]
www.idealinc.com • www.idealalert.ca
Drill 3/16” (5 mm) holes
Drill 3/16” (5 mm) holes
5-1/4” (13.35 mm) center to center
TOP OF UNIT
WALL MOUNT TEMPLATE
