SL7001 Travel Safe
The SL7001 Decibel Travel Safe provides the ultimate theft deterrent by
integrating a secure safe with a 110-decibel siren that scares away potential
thieves
.
Features:
•
110 decibel siren is triggered if the cable has been cut 50% or more.
•
Keeps medium and small items safe and secure inside a durable casing.
•
Felt-lined removable shelf protects valuables and prevents damage.
•
Secure, tamper-proof battery compartment.
•
Comes with 2 keys. Register yours at
www.decibellocks.com
to order
replacements.
Included with this Product:
1.
Decibel Safe
2.
2 keys
Requires 9 volt battery (not included).
Parts of the Safe:
1.
Safe body
2.
Cable lock hole
3.
Lock cylinder
4.
Cable
5.
Battery compartment
6.
Storage drawer
7.
Drawer side supports
8.
Removable shelf
Installing the Battery:
Note: The battery can only be removed when the safe is unlocked
to prevent tampering.
1.
Pull out the storage drawer (Fig. 2).
Remove the safe shelf.
2.
Remove the battery cover on the
inside of the storage drawer
(Fig. 3).
3.
Gently remove the battery
connector. Attach a high-
quality 9-volt alkaline battery
(not included) (Fig. 4).
4.
Place the battery into the battery
compartment. Ensure that it is
fully inserted into the battery
compartment. Slide the battery
cover back into place. Note: If the battery is not
placed correctly, the battery cover may not close properly.
5.
To test the alarm, do not insert the cable into the cable lock hole. Turn
the key to the locked position. The alarm should sound within a few
seconds. If it does not, change the battery. Use the key to unlock the safe
and disable the alarm.
Note: Batteries will last 6-12 months on average.
Using the Safe
1.
Unlock the safe.
2.
Place items in the storage drawer. Use the removable shelf for delicate
items such as tablets, phones, and jewellery, or wide items that don’t fit
in the safe storage drawer. Rest the removable shelf on the side supports
inside the storage drawer, ensuring it
is completely flat, before placing
items on it (Fig. 5). Note: Place
items with screens (ex. tablets,
smartphones) with the screen
facing do wn ward (Fig. 6).
3.
Gently push the storage drawer back
into the safe until the lock hole in the
storage drawer aligns with the lock hole
in the outer casing. Note: If the safe
is too full, the dra wer may not close properly, and you may
have to rearrange or remove items.
4.
Guide the cable around a fixed, secure object. For use in a vehicle, guide
the cable around the metal fixture under a seat or part of the vehicle
chassis. Note: Ensure this
does not interfere with the
seat rail movement.
5.
Insert the end of the cable into
the cable lock hole, ensuring it
is fully inserted. Insert the key
into the lock cylinder and lock
the safe (Fig. 7). The LED light will turn on, and the alarm will be armed.
Note: If the alarm sounds, the cable is not inserted fully into
the cable lock hole. Turn the key back to the unlocked position and
fully insert the cable before trying again.
Troubleshooting
If the alarm does not sound or makes a clicking sound when
activated:
Check the battery. Ensure that the 9-volt alkaline battery is of high quality.
If the alarm sounds while the safe is locked and the cable is in the
cable lock hole:
Ensure the storage drawer is fully inserted and the two lock holes are aligned.
Ensure the cable is fully inserted into the cable lock hole. You may have to hold
the cable in place while turning the key.
W arning: All Decibel products contain a very loud siren as a theft
deterrent. If used at close range for prolonged periods of time, this
may cause ear damage or hearing loss. Do not hold close to ears,
and keep a way from small children.
Disclaimer: The Decibel Travel Safe has been designed as a deterrent to theft.
The manufacturer/supplier will not accept any liability for personal injury,
property damage, or loss.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
