IDEAL INDUSTRIES OTDR Technical Manual Download Page 86

Page: 86 / 123

Maintenance

IDEAL

Recharging Main Batteries

Recharging Main Batteries

The charge status of both batteries is shown on
the

Unit Information

pane (press

Menu

, select

File Manager/Info.

Information

, and then

press Select).

The charge status is also indicated by the LEDs
on the left side of the unit:

To recharge the main batteries:

Connect the unit to a power outlet (or car outlet) using the AC
adapter/charger. The charge cycle will start and end automatically.

Status LED

Battery Charge Status

Green

Fully charged

Red

Charging

Yellow

Error

MPORTANT

Batteries are not charged at the factory. Fully charge them
(about 3 hours if unit is off) before using the unit for the first
time.

Batteries function and charge properly between 0 °C and 45 °C
(32 °F and 113 °F). Batteries will not charge if the temperature is
below -10 °C (14 °F) or above 45 °C (113 °F).

Never store at temperatures above 60 °C (140 °F).

Charge only with specified charger.

Summary of Contents for OTDR




























































































































Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands

IDEAL INDUSTRIES OTDR, Technical Manual

Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands