IDEAL INDUSTRIES OTDR Technical Manual Download Page 72

Page: 72 / 123

Managing Test Results

IDEAL

Copying, Renaming, or Deleting Files and Folders

Copying, Renaming, or Deleting Files and

Folders

You can copy, rename, or delete folders or single files directly from your
unit.

To copy files:
1.

Press Menu, select

File Manager/Info.

File Manager

, and then press

Select.

Select the desired file or folder as follows:

2a.

Find the file or folder using the up/down
arrows to navigate in the list and the
right arrow to open a folder.

2b.

Highlight the desired file or folder and
press Select to select it.

Select

Copy To

(F1/F2 key).

Note:

If the

Copy To

feature is not available, it is probably because the item is not

selected. Press Enter to select it.

Paste the file or folder as follows:

4a.

Find the destination folder using the up/down arrows to navigate
in the list of folders and the right arrow to open a folder.

4b.

Highlight the desired location and press either

(F1/F2 key) or

Select to complete the process.

Summary of Contents for OTDR




























































































































Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands

IDEAL INDUSTRIES OTDR, Technical Manual

Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands