CHAPTER 2
CABLE SETUP PROCEDURES
SETTING PREFERENCES
Most of the tester configuration parameters are set from the Preferences screen.
To open the Preferences screen:
1.
Select Preferences on the Ready screen. The Preferences screen appears.
Figure 2-1: Preferences Screen
2.
Use the UP/DOWN ARROW keys to select one or more options. These options
are described in the sub-sections below.
USER INFORMATION
User information identifies the unit operator for test reports.
3.
Select User Information on the Preferences screen. The User Information screen
appears.
Figure 2-2: User Information Screen
4.
Use the ALPHA/NUMERIC keys to enter your name. Press the LEFT/RIGHT
ARROW keys to move the cursor from one character to the next.
5.
Use the UP/DOWN ARROW keys to move between the fields.
6.
Press ENTER to save or ESCAPE to exit.
Note: In most screens, press ESCAPE, the user will have the option to save or not
save the changes selected during this procedure.
2-1
www.vemco.pl
