IDEAL Bikes TARGET Page 67 Instructions For Use Manual Download

Page: 67 / 88

OTHER COMPONENTS

42 Quick-release clamp

WARNING

Risk of accident and injury!

If quick-release clamps are not closed or adjusted properly, they can open while

you are riding and cause the corresponding components to come loose.

Before setting off, make sure that all quick-release clamps are closed properly

with sufficient initial tension and resting against the component or frame.

You should only remove or install wheels with quick-release axles yourself if you

have sufficient technical knowledge. Otherwise, contact your specialist dealer.

CAUTION

Risk of injury!

If you operate a quick-release clamp without due care, you could crush your

fingers.

Take extra care when opening and closing the quick-release clamp and take care

not to get your fingers caught.

Components secured with quick-release clamps are quick to adjust, remove and install

without using tools.

Tensioning screw

Quick-release lever

Fig. 20:

Quick-release clamp

Summary of Contents for TARGET

























































































Search results

Summary of Contents for TARGET

Reviews:

Related manuals for TARGET

Brands by name

Popular brands

IDEAL Bikes TARGET, Instructions For Use Manual

Search results

Summary of Contents for TARGET

Reviews:

Related manuals for TARGET

Brands by name

Popular brands