background image

89

HOW TO HANDLE THE PEDELEC

45  After a fall

 

WARNING

Risk of accident and injury!

Damaged pedelec components can break suddenly or fail in some other way.

 

»

Do not use your pedelec if it is damaged or you suspect it is damaged.

 

»

Have your pedelec checked by your specialist dealer after a fall or accident.

 

»

Have damaged components replaced with suitable original parts.

 

»

Never try to straighten bent parts yourself.

Accidents and falls can cause damage to the pedelec that may not be visible at first glance, 

e.g. hairline cracks.

•  After a fall, always have your specialist dealer replace any carbon components with 

suitable original parts.

•  If the fall occurred with the battery fitted: stop using the battery and replace it with a 

suitable original battery. Please also observe the manufacturer's instructions accom-

panying the e-drive.

•  If the pedelec tips over during a minor fall, for example, check the condition and func-

tion of the components installed on the pedelec.

46  Riding with children

Transporting children in child seats or child trailers is not permitted.

Observe the information in the bicycle passport 

˃ Section "Bicycle passport" on page 

96

.

Summary of Contents for PRISMA-810





































































































Reviews: