IDEAL Bikes PRISMA-810 Original Instructions Manual Download

Page: 56 / 100

BRAKES

25.6 Adjustments

WARNING

Risk of accident and injury!

Loss of braking power due to incorrectly adjusted brake system.

Adjustments to the brake system should be carried out by your specialist dealer.

Specialist knowledge is required to correctly adjust the brake system.
If you do not have the necessary expertise or the required tools, consult your specialist

dealer.

25.6.1 Adjusting the brake lever

Clamp screw

Adjusting screw

Fig. 12:

Adjusting the brake lever

In order to guarantee maximum braking efficiency at all times, the position and gripping

distance of the brake lever should be adjusted specifically for the cyclist.

Position of brake lever

1.  Loosen the clamp screw.
2.  Adjust the position.
3.  Tighten the clamp screw.

Brake lever gripping distance

Increase gripping distance:

• Turn adjusting screw clockwise.

Decrease gripping distance:

• Turn adjusting screw anti-clockwise.

Summary of Contents for PRISMA-810





































































































Search results

Summary of Contents for PRISMA-810

Reviews:

Related manuals for PRISMA-810

Brands by name

Popular brands

IDEAL Bikes PRISMA-810, Original Instructions Manual

Search results

Summary of Contents for PRISMA-810

Reviews:

Related manuals for PRISMA-810

Brands by name

Popular brands