___________________________________________________________________
Co
Brite
DX1
User Manual
20
•
Make sure that the optio
n “CDM20802 driver” is selected
Note
: If installing updates of the Software, do NOT select the
“CDM20802 driver” as it will install multiple instances o
f the driver.
•
Follow instructions given by installer software. You may chose custom options
in the process.
•
Now, supply power to the instrument. A red status LED should light up that
indicates power to the instrument
•
Plug in the USB cable to the instrument and your computer
•
Once plugged in, your computer should start automatically configuring drivers
for the instrument. Your computer will signal once installation is done
•
Now start the Software under “Start –
Programs
–
CoBrite
5.3
Start screen
After starting the GUI software the following screen will appear:
First, chose which interface is used to connect to the instrument by clicking on
“Ethernet”, “Mainframe description” or “USB Serial Port”
. If USB is used, we
recommend using “Mainframe description”.
5.3.1
Ethernet
(Not applicable for CoBriteDX1 as this instrument provides no Ethernet port)
Summary of Contents for CoBrite Series
Page 1: ......
