ID-AL - My Music Player and My Music Player LE - User Guide V1.0
Method
Process
“Advanced” menu
ADMINISTRATOR
→
UPDATE FTP NOW
→ Select a
PRESET
number from
01
to
10
→
FTP
(preset number)
SURE?
, select
YES
.
Web browser software
FTP Client
page → In the chosen
Preset
→ Click on
Launch Preset
.
Timestamped programming
(Scheduler)
Within an event → Add a command
FTP UPDATE
with a preset
number from 1 to 10.
RS-232 serial link
Please refer to RS-232 Serial Link Protocol (page 91).
. Using a Removable Device Storage with a Script
Description
•
Manage the content of the Main Media with the use of a storage device that contains a
management command script file and an update content. The file management commands are
executed with the reboot of the player when the storage device is plugged into the player.
Removable Device Storage with Script
Requirements
•
A computer with a text file editor to prepare a script file.
•
A third-party storage device with a script file (
script.txt
) and the update content.
•
The script file and the update content can optionally be compressed to a ZIP file using compatible
software. This ZIP file also may be password-protected.
Recommended usage
•
This method is recommended when the update is done with the use of a removable storage device,
when the player is not accessible through the network. Its also recommended for the preparation
before any installation and maintenance, player by player.
•
Pros:
◦
Easy to use.
◦
Recommended for an on-site maintenance.
◦
Recommended for an exclusive content management with a distant provider.
◦
Recommended for the management of distant location players without an Ethernet connection
access.
◦
Recommended with the use of a built-in l connector for the Main Media (My Music Player only).
◦
Easy to install in a restricted network access policies environment.
•
Cons:
◦
Required skill level about the Script function.
◦
Requires an on-site handling.
◦
Required to know exactly the content paths into the Main Media before the writing of the Script.
◦
Required a third-party storage support in order to update
◦
Required a stop of playback.
Procedure
1. On a computer, prepare a third-party storage device (an USB flash drive or a SD card):
•
Format the storage device following the instructions in Preparing a Storage Device (page 18).
•
Onto the storage device, copy a script file (
script.txt
) with its content or a zipped script file
(
script.zip
). In order to create a script file, please refer to Content Updates with the Use of
-46-
© 2017, Waves System
ID-AL Player
Secondary Storage Device
or Main Media
Script
