ID-AL My Music Player, User Manual

Page: 29 / 96

ID-AL - My Music Player and My Music Player LE - User Guide V1.0
Method Process
Infrared remote control Press the button (
►►
).
Front panel button (My Music Player only) Press the button (
2
).
Web browser software
User
page → click (
►►
).
RS-232 serial link Please refer to RS-232 Serial Link Protocol (page 91).
. Playing the Previous Track or Previous Web Radio (PREVIOUS
Command)
Principle:
• This command is assigned to play the previous entry of the current playback.
• Player behavior:
The behavior of the PREVIOUS command depends on the played source:
◦
MUSIC folder: plays the previous track of the MUSIC folder. If the playback reaches the first
track of the current folder, the first track of the folder is replayed.
◦ PLAYLIST folder: plays the previous track of the current playlist. If the playback reaches the first
track of the current playlist, the first track of the playlist is replayed.
◦ SPOT folder: plays previous track of the SPOT folder. If the playback reaches the first track of
the current folder, the first track of the folder is replayed.
◦ Web radio: plays the previous web radio in the web radio list. If the playback reaches the first
web radio preset of the listing, the last preset web radio of the list is played.
◦ Auxiliary input: no action.
◦ Stopped: plays previous entry according to the playback position when the player has been
stopped.
Procedure:
After have launched the playback of a MUSIC folder, a PLAYLIST folder or Web radio, launch the
PREVIOUS command to play the previous entry of the current playback context.
Methods:
Method Process
Infrared remote control Press the button (
◄◄
).
Web browser software
User
page → click (
◄◄
).
RS-232 serial link Please refer to RS-232 Serial Link Protocol (page 91).
8.3. Changing the Main Volume
Principle:
• This command is assigned to modify the main volume setting of the player.
• Player behavior:
The main volume affects the global setting of the volume of the player indifferently to the context of
playback. This setting applies an attenuation towards the nominal volume of the main volume.
Procedure:
Select a volume level value between 0dB to -64 dB (MUTE). For more information about volumes,
please refer to Player Audio Diagram (page 66) and Setting the Volumes and the Gains of the Player
(page 56).
-29- © 2017, Waves System