18
PRT-ATH1 / ACC-ATH1
Protege Temperature and Humidity Sensor
Installation Manual | April 2011
9
Intelligent Monitoring
The Protege Temperature and Humidity Sensor is designed to interface with the Protege Network. In order to
achieve this several set-up steps must be carried out.
9.1
Monitoring Setup
The Protege Temperature and Humidity Sensor will register with the Protege Integrated System Controller as an
Analog Expander Module, AExxx where the xxx is the address determined by the configuration switch settings.
Once the Protege Temperature and Humidity Sensor has registered at the selected Analog Expander address
and is online, each channel must be enabled and given an update time period. This can be achieved by
performing the following steps:
Analog Expander Properties Window