Innovative Circuit Technology Ltd.
38
Control:
User has read-only access to the panel, but can
enable or disable the output, and change some of the basic
settings. Cannot change passwords or network settings.
View-Only:
User can only view status, cannot change any
settings
New Password:
Allows you to change the password for the selected
user.
Confirm New Password:
When changing a password, you must re-
enter the new password here to confirm.
Administrator Password:
Enter the current Administrator password
here to confirm changes.
5.9. Maintenance
This page in the Web utility allows you to reset the power supply
communications, restore the power supply communications and
alarm settings to the factory default settings, and send a test e-mail
to verify email connections using the Web server interface screen.
Reset Communications
Pressing the Reset
button will reset the communications controller on
the power supply without interrupting DC power to the output
terminals. All existing settings will be maintained.
Restore Factory Default Settings
Pressing the Restore
button will restore ALL
communications and
alarm settings to the original factory default values, including all
passwords. If you only want to reset the IP address and Administrator
password of the power supply, see the Administrator Password / IP
Address Reset
section.
Export And Import Settings
The Manage Settings button will take you to the Export and Import
Settings page, where you may export all the system settings (other
than the Administrator password, Network and Web Server settings)
to an encrypted
.cfg
file on the local computer. Use the Import
Settings section on other systems to locate this file and then import it
to any other Digital Series 2 unit you are logged in to, greatly
simplifying the configuration of multiple identical units.