Innovative Circuit Technology Ltd.
37
Send E-mail:
If this box is checked, an e-mail alarm
notification will be sent when an over-temperature failure
occurs.
PARALLEL UNIT OFFLINE ALARM
This alarm does not affect the supply output state.
Activate Alarm Form C Contact:
If this box is checked, the
condition if communications is lost between any units
connected together through the serial interface. This setting
has no effect if parallel operation is not active.
Send E-mail:
If this box is checked, an e-mail alarm
notification will be sent if communications is lost between any
units connected together through the RS485 interface. This
setting has no effect if parallel operation is not active.
5.8. User Setup
This page allows you to configure passwords for up to 10 users to
access the power supply. To save any password changes, click on
Save Settings
at the bottom of this page.
The unit has no password assigned by default, so an Administrator
password should be assigned to your panel for improved security.
NOTICE!
Please record your password. If the Administrator password is
lost, the power supply must be reset to return the password to
the default setting. See the Password Reset section for more
information.
Select a User to Edit or Add a New User:
Choose which of the user
accounts to edit, or add a new user. Set the access level to be
appropriate for the amount of control each user requires.
Administrator:
This level has full access to the panel
settings, and can set up users and change passwords