2AMDI511VPVRDBS
Mono channel costant voltage dimmer DALI/PUSH/POT/1-10V/BLE
Monochannel Dimmers with Output Voltage PWM.
Input Range: 8-53V DC.
Output Voltage PWM 8-53V DC with current from 0A to 12A (576W at 48V
DC).
Controllable with Android/iOS app IoT Light.
In order to set the fade output and the logarithmic or linear output you will
need the 2AMIN4030000N interface sold separately, the other working
modes are automatically detected by the device. Please refer to user
manual.
Input Controls
Type
Qty
Insulated Push button
1
DALI
1
Linear Potentiometer 100K
1
0-10V Passive
1
1-10V Passive
1
Bluetooth LE
1
Output Sync
Type
Qty
PWM
1
TECHNICAL NOTES
- Monochannel Dimmers with Output Voltage PWM.
- Input Range: 8-53V DC.
- Power 144W @ 12V, 288W @ 24V, 576W @ 48V.
- The device is not equipped with earth connection
Protection against accidental contact with live parts is garantied by the
enclosure.
- Power Connector Cross-section of conductors 14-30 AWG (0.05-2.08
mmq).
- Interface Connector Cross-section of conductors 15-30 AWG (0.05-1.65
mmq).
- Output Voltage PWM 8-53V DC with current from 0A to 12A (576W at 48V
DC).
- Input Controls: Insulated Push button x1, DALI x1, Linear Potentiometer
100K x1, 0-10V Passive x1, 1-10V Passive x1, Bluetooth LE x1.
- Output Sync: PWM x1.
- Notice on 0-10V (1-10V): this control circuits is not insulated, use only
insulated 0-10V(1-10V) source generator.
- PWM Frequency: 390 Hz.
- Thermal foldback: 150 C. Degrees on uC.
- Storage Temperature Min: -40 Max: 60 C. Degrees.
- Working Temperature Min: -20 Max: 50 C. Degrees.
- Printed Circuit UL.
- Protection Class: IP20.
- Weight: 44 gr.
- Standard Dimension 40x80x24.45 mm.
- Dimension with accessories 40x100x24.45 mm.
- Reverse polarity protection.
- Open circuit protection.
- Surge voltage protection.
- Over temperature protection.
2
IOTLIGHT - User Manual 2AMDI511VPVRDBS
