Tunnel Master® Jr. User Manual
- Page 56
Chapter 6: Entrance Keypad
It is very important that one of the two options be used each day. Failure to close a shift will result in car and
service counts being inaccurate, as they would run multiple days into one shift. You may also close your shift by
pressing the up arrow on the entrance keypad.
Reset - Pressing the up arrow key on the Entrance Keypad will reset your current car count!
Bump a Shift or Manually Close Current Shift
Step
Action
Screen Display
1
Access the Main Menu by pressing the
“Menu” button on the display pad.
NOTE: If a password has been set it will be
necessary to enter the password before the
main menu can be accessed.
[1] Bump Shift
[4] View Counts
[2] Wet Down Wash
[5] Print Reports
[3] Configure Wash
2
Press the numeric key 1 to select Bump Shift.
NOTE: A shift report will print automatically
at this point if there is an optional report
printer attached.
Bump Shift
Bump Shift (Y/N)?
3
Using the numeric keypad press either Y for
yes, or N for no to close the shift at this time.
Bump Shift
Bump Shift (Y/N)? N
4
Press the ENT button on the display pad to
enter selection and return to the Main Menu.
[1] Bump Shift [4] View Counts
[2] Wet Down Wash
[5] Print Reports
[3] Configure Wash
Table 6-5.
Bump a Shift or Manually Close the Current Shift
Summary of Contents for Tunnel Master Jr
Page 1: ...Tunnel Master Jr User Manual Version 5 0...
Page 70: ......
