Firmware Version 1.2
MultiSystem 4070
148
Cleaning and maintenance
DEU
Repair
If repair is needed, please contact our customer service department. Please
have the following information ready when you contact us. If you are returning
the instrument, please also attach the following information:
•
Company, department, contact person
•
Address, telephone and fax number, email address
•
Faulty part (instrument, sensor, cable, power pack)
•
PC used (CPU, operating system, RAM, HDD)
•
Software version used
(HYDRO
com
or
HYDRO
link
)
•
Description of fault (please leave the settings on your instrument exactly
as they appeared at the time of the fault/error; please briefly describe the
use of the instrument, the connection of the sensors, the instrument set-up
such as recording parameters, triggers, how many measurements were
recorded, etc.)
Manufacturer address and customer service
Please contact the HYDROTECHNIK customer service department: