How to Use This Guide xi
Pr
ef
ace
How to Use This Guide
This manual describes how to configure your Endeavor Plus single board computer
to meet various operating requirements.
The following is a summary of the chapter contents:
t
Chapter 1: Introduction
provides an overview of the system
features, product specifications, and basic system architecture.
t
Chapter 2: Hardware Configuration Setting
provides definitions
and locations of jumpers and connectors.
t
Chapter 3: System Installation
describes how to properly mount the
CPU, main memory, and DiskOnChip for safe installation and provides
a programming guide for the Watchdog Timer.
t
Chapter 4: BIOS Setup Information
provides definitions of setup
parameters and describes how to get advanced BIOS performance and
update the BIOS with the new release available from the ICS Advent
Web site. In addition, a POST checkpoint list is provided to help with
troubleshooting.
t
Chapter 5: Troubleshooting
provides a few helpful tips to quickly
get the Endeavor Plus single board computer running without failure
and some operating system (OS) diagnostics.
t
Appendix A: WDT Programming
provides a general description of
watchdog timer programming, configuration register definitions, and
and some guidelines.
Note:
Additional technical information, BIOS updates, and
drivers are available from the ICS Advent Web site,
www.icsadvent.com,
under “Technical Support”.