BIOS POST Check Point List 4-35
BI
O
S Se
tu
p
Bootblock Recovery Codes
The bootblock recovery checkpoint hex codes are listed in order of execution:
Table 4-11.Bootblock Recovery Codes
Code
Description
E0
The onboard floppy controller, if available, is initialized. Beginning the base
512kB memory test.
E1
Initializing the interrupt vector table.
E2
Initializing the DMA and Interrupt controllers.
E6
Enabling the floppy drive controller and Timer IRQs. Enabling internal
cache memory.
ED
Initializing the floppy drive.
EE
Looking for a diskette in drive A: and reading first sector of the diskette.
EF
A read error occurred while reading the floppy disk in drive A: .
F0
Searching for the AMIBOOT.ROM file in the root directory.
F1
The AMIBOOT.ROM file is not in the root directory.
F2
Reading and analyzing the floppy diskette FAT to find the clusters
occupied by the AMIBOOT.ROM file.
F3
Begin reading AMIBOOT.ROM file, cluster by cluster.
F4
The AMIBOOT.ROM file is not the correct size.
F5
Disabling internal cache memory.
FB
Detecting the type of Flash ROM.
FC
Erasing the Flash ROM.
FD
Programming the Flash ROM
FF
Flash ROM programming was successful. Restarting the system BIOS.