3-10
System Installation
M-systems Flash Disk
The Endeavor Plus includes one 32-pin DIP socket for installing an M-systems Flash Disk from
2MB to 144MB.The DiskOnChip is not a Plug-n-Play device; its address must be manually
selected using JP12. Before installing, make certain that the memory window address jumper
setting
(JP12)
is set on the right position to prevent system conflicts. Follow the DOC
(DiskOnChip) installation procedure below. Otherwise, the Flash chip may be damaged due to
incorrect installation.
Installing DiskOnChip (DOC)
Align the DiskOnChip (DOC) with the pin holes on the socket. Ensure that the notched corner
or dot mark (pin 1) of the DOC corresponds to the notched corner of the socket. Press down on
the DOC gently until it fits into place. If the installation procedure is correctly performed, the
Flash disk can be viewed as a normal hard disk to access read/write data.
The Endeavor Plus will instruct the user to install and utilize DOC for practical application. If
you want to boot from this Flash disk, refer to the application note from M-systems. You can
easily get relatively advanced information from M-systems’ shipping package (such as the
product manual) or their Web site
http://www.m-sys.co
m
.
CAUTION
Ensure that the DOC is inserted properly. Inserting the DOC
backwards will damage it.