5-6
Troubleshooting
OS Diagnostics
This is a brief guide to properly storing the driver for any Microsoft Windows 95/98/NT
device, as well as starting special functions in a specific operating system. For other operating
systems, please refer to the the operating system (OS) manual/guidebook.
ACPI Function in Windows 98
Windows 98/2000 are the only operating systems that supports the ACPI function, in terms of
activating the suspend-to-RAM feature. This feature is not supported by ICS Advent Legacy
backplanesTo enable Windows 98 to search for this feature, a special installation command is
required :
(1) setup
(standard installation)
(2) setup [space] /p [space] j
(support ACPI feature)
Display Setup
By default, any Windows Operating System starts with a resolution of 640 x 480 pixels and a
16-color display. Please load the display driver provided in the Endeavor Plus CD to maximize
the VGA performance. If you are using a monitor that Windows cannot identify, you will need
to set up a system monitor to correctly retrieve display output, found in the display setup menu.
For Windows NT 4.0 users, as the Endeavor Plus provides an AGP type on-chip display
feature, Service Pack 3.0 or above is required to activate the AGP VGA display feature.
Network Setup
Windows 95/98 users
– Perform the following steps:
1)
Install an ISA/PCI network card into an ISA/PCI slot.
2)
Start Windows 95/98 and let Window 95/98 automatically detect your network
adapter.
3)
Provide the driver and complete installation.
4)
After you come back to Windows, restart your Windows system.
