Auto Sentry® Petro - Installation Guide
16
Molded Plastic Installation
Roto Molded Plastic Installation
After the Auto Sentry® Petro is secured to the concrete with the J bolts, the next step is to attach
the five Roto Molded Plastic pieces to the metal core of the Auto Sentry® Petro using the
hardware in the following labeled plastic bags:
Bag A
(6) 1/4” - 20 × 1- 1/2” cap screws and
Bag H
(6) 1/4” washers
Bag B
(4) 1/4” - 20 × 1- 1/2” oval screws
Bag C
(3) #10 - 1-1/2” screws with (3) #8 washers
Bag D & I
(21) #8 - 11 x 1- 1/4” screws with (21) #8 flat washers
Bag E
(8) 1/4” - 20 × 3/8” bolts
Bag F
(8) #10 - 32 × 1/2” machine screws (no washers)
Bag J
(8) #10 - 32 × 1” Screws (no washers)
Bag K
(19) #6 Keps Nuts
Bag M
(1) #6 - 32 × 3/8” Machine Screws
Bag N
(20) Rubber Washers
Figure 7. Roto Molded Plastic Pieces
#
Roto Mold Description
1
Base Front
2
Base Back
3
Gray Cover
4
Front Blue Cover
5
Back Blue Cover
#1
#2
#3
#4
#5