2 Safety
6
WIKA Operating Instruction, Model CPG500
14034181.
01
01
/201
3
G
B/
D
GB
2 Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate
CPG500 digital pressure gauge has been selected in terms of measuring range,
design and specific measuring conditions. Serious injuries and/or damage can occur
should these not be observed.
Further important safety instructions can be found in the individual chapters of
these operating instructions.
2.1
Intended use
The CPG500 digital pressure gauge can be used as a calibration instrument and also for any
application which requires accuracy pressure measurement.
The CPG500 digital pressure gauge has been designed and built solely for the intended use
described here, and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the CPG500 digital pressure gauge outside of its technical
specifications requires the instrument to be shut down immediately and inspected by an authorised
WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from humidity,
impacts, strong magnetic fields, static electricity and extreme temperatures, do not insert any
objects into the instrument or its openings). Plugs and sockets must be protected from
contamination.
If the CPG500 digital pressure gauge is transported from a cold into a warm environment, the
formation of condensation may result in the instrument malfunctioning. Before putting it back into
operation, wait for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary to the
intended use.
