1 Safety Instructions
E15IB001EN-N
5
See the reference guide for a comprehensive description of the instrument.
Download Anton Paar documents for free from the Anton Paar website: https://www.anton-paar.com
1 Safety Instructions
• Read the documentation before using the instru-
ment.
• Follow all hints and instructions in the docu-
mentation to ensure the correct use and safe
functioning of the instrument.
• The documentation is a part of the product.
Keep it for the complete working life of the prod-
uct and make it easily accessible for all persons
involved with the product. If you receive any
additions or revisions to the documentation from
Anton Paar GmbH, these must be treated as
part of the documentation.
1.1 Liability
• This document does not claim to address all
safety issues associated with the use of the
instrument and samples. It is your responsibility
to establish health and safety practices and to
determine the applicability of regulatory limita-
tions.
• Anton Paar GmbH only warrants the proper
functioning of the instrument if no modifications
are made to mechanics, electronics, or soft-
ware.
• Use the instrument only for the purpose de-
scribed in the documentation. Anton Paar GmbH
is not liable for damages caused by incorrect use
of the instrument.
• The results delivered by the instrument depend
not only on the correct functioning of the instru-
ment, but also on various other factors. We
therefore recommend that you have the results
checked (e.g. plausibility tested) by skilled
persons before consequential actions are taken
based on the results.
1.2 Installation and Use
• The installation procedure shall be carried out
only by authorized persons who are familiar
with the installation instructions.
• Use only accessories, consumables, or spare
parts supplied or approved by Anton Paar
GmbH.
• Ensure that all operators have been trained
beforehand to use the instrument safely and
correctly.
• Ensure that the instrument is sufficiently super-
vised during operation.
• In case of damage or malfunction, do not con-
tinue operating the instrument. Do not operate
the instrument under conditions which could
result in damage to goods or injuries or loss of
life.
Operation in areas with risk of explosion
• The instrument is
not
explosion-proof and
therefore must not be operated in areas with
risk of explosion.
General precautions
• Observe and adhere to your national safety
regulations regarding the handling of all sub-
stances associated with your measurements
(e.g. use safety goggles, gloves, respiratory
protection, etc.).
• Samples and cleaning liquids that have been
used in the measuring system are not suited for
human consumption after use.
• Before a measurement check the wetted parts
of the instrument for chemical resistance to the
samples and cleaning agents used.
• Take care that the liquids (samples and cleaning
agents) or gases that you use are chemically
compatible when they come into contact with
each other. They must not react exothermally or
produce solid particles, which might stick to the
inner walls of the measuring cells.
• Before you start a measurement or cleaning
procedure, take care that all parts, in particular
the measuring cells, the injection adapters, the
hoses, and the waste vessel, are properly con-
nected and in good condition.
