ICS Advent WDT1000-P, Product Manual

Page: 12 / 34

Manual Number: 00650-009-28 Page 1-4
WDT1000-P Manual
Specifications
Watchdog Timer
Time-out Software selectable from 5 mSec to 291 Sec in 5
mSec increments.
Clock 255 Hz, crystal controlled.
Address Continuously mappable within 000 to 3FF hex I/O
range.
Temperature Alarm
Level Factory preset at 50 ° C ±2 ° Adjustable.
Interrupt Output Jumper selectable.
Alternate Output Can be read at base a 4.
Serial Interface
Multipoint Compatible with RS422 and RS485 specifications.
Common Mode Voltage -7V to +12V CMV will not affect operation.
Driver Output Capability 60 mA maximum.
Receiver Input Sensitivity Can detect signals as small as ±200 mV.
Baud Rate
50 to 9600 baud. (to 56,000 baud optional).
Crystal oscillator on board.
Address Continuously mappable within I/O address range000- 3FF hex.
Environmental
Operating Temperature Range 0 to +60 ° C.
Storage Temperature Range -50 ° to +120 ° C.
Humidity 10% to 90% RH, non-condensing.
Power Required:
+5 VDC at 420 mA typical, 500 mA maximum.
Size
13.3 inches long. Requires full size slot.
(00201.wmf)