background image

USB 2.0 

USB-2000

Thank you for purchasing the USB

-2000

. Please read this guide 

thoroughly before installation. 

 

FCC Radio Frequency Interference Statement Warning 

The USB

-2000 

have been tested and found compliant with the limits for a Class 

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when installed and 
operated in a

 

commercial environment. The USB

-2000

 

generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with this user guide, may cause harmful interference 
to radio communications. Operation of the USB

-2000

 in a residential area is likely

 to cause harmful interference in

 

which case the user will be required to correct the 

interference at his own

 

expense.  

CE Statement 

We, Icron Technologies Corporation, declare under our sole responsibility 
that the USB

-2000

, to which this 

declaration relates, are in conformity with European Standard EN 55022/A1 
Class A, and EN 50082-1 (IEC 801-2, IEC 801-3, IEC 801-4) 

IC Statement 

These Class A digital apparatus complies with Canadian ICES-003. 

 

©2006 Icron Technologies Corporation. All rights reserved. Icron 
Technologies Corporation, the Icron Technologies Corporation logo, and the 
Icron Technologies Corporation products referred to herein are either the 
trademarks or the registered trademarks of Icron Technologies Corporation. 
All other trademarks are property of their respective owners. Icron 
Technologies Corporation assumes no responsibility for errors that may 
appear in this manual. Information contained herein is subject to change 
without notice. 

Summary of Contents for USB-2000















Reviews: