USB 2.0 Ranger® 2304-LAN
4-Port USB 2.0 Ethernet LAN
Extender System
Quick
Start
Guide
1
2
3
4
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Connect the REX to the AC adapter and
plug it into a power source.
Connect the LEX to the computer
using the included USB cable.
Attach USB device(s) to the REX.
Computer
Pro AV
KVM Extension
Digital Signage
Medical Imaging
Industrial Automation
Digital Projection
Icron’s USB and Video
Extension Solutions
For additional details on configuration
and operation of your
USB 2.0 Ranger 2304-LAN, refer to the
complete user guide available online at:
icron.com/2304-LAN
For technical support with your
USB 2.0 Ranger 2304-LAN product, contact:
icron.com/support
icron.com
Max 100m
(Cat 5e cable not included)
1
Place extenders where desired and connect
the Cat 5e extension link cabling to the
Link ports (RJ45) on the LEX and REX.
Direct Connect
1
2
3
4
Connect the LEX to the computer
using the included USB cable.
Place the REX where desired. Connect
the Cat 5e patch cable from the Link port
(RJ45) to a network switch or wall network
port connected to a switch and connect
the REX to a power source.
1
Place the LEX where desired and connect
the Cat 5e patch cable from the Link port
(RJ45) to a network switch or wall network
port connected to a switch.
Network Connect
Attach USB device(s) to the REX.
Link
Pair
Config
Host
Ac
tivit
y
Link
Po
wer
Link
Pair
Config
Link
Pair
DC IN 24V@1A
Config
Link
Pair
DC IN 24V@1A
Config
Link
Pair
Config
Host
Ac
tivit
y
Link
Po
wer
Computer
Link
Pair
Config
Link
Pair
DC IN 24V@1A
Config
Max 100m between network devices
Max 100m between network devices
90-01047-A04
LEX = Local Extender, REX = Remote Extender
