background image

 

19

GUARANTEE 

From the moment your Geemarc product is purchased, 
Geemarc guarantee it for the period of one year. During this 
time, all repairs or replacements (at our discretion) are free of 
charge. Should you experience a problem then contact our help 
line or visit our website at www.geemarc.com.  The guarantee 
does not cover accidents, negligence or breakages to any parts. 
The product must not be tampered with or taken apart by 
anyone who is not an authorized Geemarc representative. The 
Geemarc guarantee in no way limits your legal rights.  
 

IMPORTANT:

 YOUR RECEIPT IS PART OF YOUR 

GUARANTEE AND MUST BE RETAINED AND PRODUCED 
IN THE EVENT OF A WARRANTY CLAIM.  
 

 

 

 
DECLARATION:

 Geemarc Telecom SA hereby declares that 

this product is in compliance with the essential requirements 
and other relevant provisions of the Radio and 
Telecommunications Terminal Equipment Directive 1999/5/EEC 
and in particular article 3 section 1a, 1b and section 2. The 
telephone does not operate if the line current is lower than 18 
mA. 
 

The declaration of conformity may be consulted at 
www.geemarc.com 

 

 

 

Please note: The guarantee applies to 

the United Kingdom only 

Summary of Contents for i-450























Reviews: