Step 2 Select the
Enable
checkbox, and there are two mapping modes:
Custom
and
Default
.
●
Select
Custom
, click
to modify the external port as needed.
●
Select
Default
, to finish mapping with an unoccupied port automatically, and you
cannot modify port mapping
Step 3 Click
Save
.
4.6.7 SNMP
SNMP (Simple Network Management Protocol) can be used to enable software such as MIB Builder and
MG-SOFT MIB Browser to connect to the camera and manage and monitor the camera.
Prerequisites
●
Install SNMP monitoring and managing tools such as MIB Builder and MG-SOFT MIB Browser.
●
Acquire the MIB file from technical support.
Procedure
Step 1
Select
Setting
>
Network
>
SNMP
.
Figure 4-79 SNMP (1)
85
