Step 2
Select the scan number and set the speed. Step 3
Click
Setup
to set the left limit and right limit.
1) Click
Set Left Limit
to set the current position to be the left limit.
2) Click
Set Right Limit
to set the current position to be the right limit.
Step 4
Click
Start
to start scanning. Click
Stop
to stop scanning.
●
If you operate a PTZ during a scan, the camera will stop the tour.
●
It is recommended to set up idle motion to automate the activation of the tour.
4.3.2.4
Pattern
A Pattern is a recorded series of operations that you make to the camera, and when the pattern
starts, the camera performs the operations repeatedly. The operations include horizontal and vertical
movements, zoom, and preset calling. Record and save the operations as a pattern to call the pattern
path directly.
Step 1
Select
Setting
>
PTZ settings
>
Function
>
Pattern
.
Figure 4-11 Pattern
26
