Step 3
Select a relay-in port and a sensor type.
●
Sensor Type: NO or NC.
●
Anti-Dither: Only record one alarm event during the anti-dither period.
Step 4
Set arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage".
Step 5
Click
Save
.
Relay-in (2)
You can select the mode from
Alarm
and
Arming/Disarming
.
Figure 5-93 Select the mode
●
When selecting
Alarm
, the function is same as Relay-in (1). For details, see "5.18.1 Relay-in (1)".
●
When selecting
Arming/Disarming
, you can enable arming or disarming mode through one press
on an external alarm system.
Step 1
Select
Enable
checkbox to enable the alarm function. Step 2
Select a relay-in port, for details, see "5.18.1 Relay-in (1)".
Step 3
In the
Mode
list, select
Arming/Disarming.
Figure 5-94 Arming/Disarming
The arming/disarming checkbox is selected by default. Do not cancel the selection; otherwise
the configuration is invalid.
Step 4
Select the sensor type from
NO
and
NC.
. Step 5
Click
Save
.
174
