Step 5
Click
Save
.
Schedule
function is only available on single-channel cameras.
Setting IVS
Below are steps you can take to ensure your IVS rule setup is optimized:
●
Reduce the complexity of the target area as much as possible.
●
If IVS rules are setup on a channel, make sure motion detect/ Intelligent motion detect is
disabled on that channel, as having both IVS rules and motion detect enabled on the same
channel have been known to cause issues.
●
Avoid target areas such with glass, reflective surfaces, water surfaces, heavily wooded
locations as well as Insects flying close to the camera lens as these can generate false
positive alerts.
●
Target areas with a dense amount of target objects is not recommended.
●
Target areas should avoid heavy backlit, direct light and locations with frequent illumination
changes (shadows, etc).
●
Disable Intellistreaming if enabled. Intellistreaming disables features such as IVS rules.
●
The recommended target size should be less than 10% of the overall image.
●
The minimum recommended target size is 50×50 pixels.
●
The target object should be continuously present within the frame for at least two seconds.
●
The target object and the background brightness difference should not be less than 10
greyscale.
Rule Configuration
Set rules for IVS, including tripwire, intrusion, abandoned object, moving object, fast moving, parking
detection, crowd gathering, and loitering detection.
●
Select
Setting
>
Event
>
Smart Plan
, and enable
IVS
.
●
Select
Setting
>
Event
>
IVS
138
