Setting Video Detection
The camera will trigger an event if there are considerable pixellation changes on the video such as
moving objects or if the camera as been tampered and moved from its original position.
Setting Motion Detection
The camera will trigger an event if there is pixellation change due to movement.
●
If motion detection and Intelligent Motion detection is enabled simultaneously, with configured
linked events, the linked events will take effect as following:
◇
When
Motion Detection
is triggered, the camera will record and take snapshots, but other
configured linkages such as sending emails, PTZ operation will not take effect.
◇
When Intelligent Motion Detection is triggered, all the configured linkages take effect.
●
If you only enable motion detection, all the configured linkages take effect when motion
detection is triggered.
Step 1
Select
Setting
>
Event
>
Video Detection
>
Motion Detection
.
Figure 5-22 Motion detection
Step 2
Select the
Enable
checkbox to enable motion detection.
Step 3
Set an Regionfor motion detection.
1) Click
Setup
next to
Area
.
Figure 5-23 Area
130
