13
440 01 2021 01
For
“Concentric Termination Kit”
Venting table, see
“
Section 11”
in this manual.
Vent Termination Clearances
CARBON MONOXIDE POISONING AND FIRE
HAZARD.
Failure to properly vent this furnace could result in
death, personal injury and/or property damage.
Inlet and outlet pipes may NOT be vented directly
above each other.
!
WARNING
1. Determine termination locations based on clearances spe-
cified in following steps and as shown in
Figure 7, Figure 8,
Figure 20,
through
Figure 27.
For
“Concentric Termination Kit”
clearances, see Figure 30,
Figure 31, Figure 32, Figure 33 and Figure 34 in “
Section 10”
in this manual.
2. This furnace is Dual Certified and can be installed as a
single pipe appliance (all combustion from inside the struc-
ture) or as a direct vent appliance where all combustion air is
taken from outside the structure.
3. For Single Pipe installation refer to
Figure 8
for vent ter-
mination clearances.
4. For Direct Vent installation, refer to
Figure 7
for vent ter-
mination.
Summary of Contents for *9MPT050F12
Page 48: ...440 01 2021 01 48 ...
