ICP DAS WISE User Manual
http://wise.icpdas.com
39
Please note: If the connection mode is “Specify an IP address”, then you
make modification to the IP address, the system will logout automatically
and re-connect to the web page automatically based on the new setting. If
the connection mode is “Obtain an IP address automatically (DHCP)”, the
system may fail to re-connect to the web page because the IP address is
changed. Please use
to search the WISE, get the new IP
address of WISE, and then launch browser to connect to the WISE with the
new IP address.
5.3
Account Setting
WISE provides three levels of authority account as 1 Administrator account,
5 User accounts and 1 Guest account. The administrator account need to set
up its password when the administrator login WISE for the first time. About
the User account, it must be enabled by the administrator and need the
administrator to assign its login password. The default login password for
Guest account is “Guest”. All login accounts of WISE can modify its
password in the “
Account Setting
” page, and the password length is limited
to 16 characters. About the “Idle Time” setting, all login accounts of WISE
can
set
up
the
“Idle Time” independently. It mean the
administrator/User/Guest account login the WISE page, and the idle time
exceeds the pre-set time interval, the login account will be automatically
logged out.
After all settings are completed, click “Save” button to save the
changes. Following is the interface for the setting of the Administrator
account.
Figure 5-5
：
Account Setting Page for Administrator
Administrator can set up the Email address in the “Administrator Profile
Setting” section. After complete the setting, WISE will send the alarm email
