ICP DAS USA WISE-75 M Series User Manual Download Page 167

Page: 167 / 314

ICP DAS WISE User Manual

http://wise.icpdas.com

167

Figure 9-19

：

List of "SNMP Trap Messages" edited by "Channel Data" type



User-Defined Data type

In addition to the “Channel Data” type, user can also select the
“User-Defined Data” type to edit the content of the SNMP Trap

message. Following is the setting page of the “User-Defined Data”

type:

Figure 9-20

：

SNMP Trap "User-Defined Data" type Setting Page

In the “User-Defined Data” type settings page, the user can enter the

words (or sentence) he want to present in the message and edit the data

format and message content by himself. The “User-Defined Data” field

provides users with a special code string to add real-time I/O module

channel data into the “User-Defined Data” text. User can click the

Summary of Contents for WISE-75 M Series



























































































































































































































































































































Search results

Summary of Contents for WISE-75 M Series

Reviews:

Related manuals for WISE-75 M Series

Brands by name

Popular brands

ICP DAS USA WISE-75 M Series, User Manual

Search results

Summary of Contents for WISE-75 M Series

Reviews:

Related manuals for WISE-75 M Series

Brands by name

Popular brands