ICP DAS WISE User Manual
http://wise.icpdas.com
156
Figure 9-3
：
Timer Status and Actions
Follow the following steps
：
i
Input the nickname of the timer in the “Nickname” field.
ii
Specify the initial status of the timer from the dropdown list of the
“Initial Status” field. The “Initial Status” could be “Stop” or “Start”
status.
iii
Specify the period interval in units of seconds. There are two options
to setup the period interval:
Assign Period:
Input the period interval in units of seconds
manually.
Internal Register: Assign the period interval as the value of the
selected Internal Register.
Please note: The user must setup Internal Register before using Internal
Register as timer period. Please refer to “
” to setup
Internal Register.
iv
Click
button to create a new Timer, and add to the Timer list.
Stop
Not Timeout
Timeout
Start
Reset
Timer Period
Timer
Status
Pause
Resume
Timer
Action
