ICP DAS WISE User Manual
http://wise.icpdas.com
153
Figure 9-1
：
Internal Register List Page
v
To modify the settings of a pre-set Internal Register, please click on the
radio button in front of the Internal Register, and then click on
“Setting” to modify the settings.
vi
In the Internal Register Setting Page, user can modify the setting
of ”Nickname”, “Type” and “Initial Value” and “Retain Variable” of
Internal Register in the Internal Register Setting page, and input the
description of this Internal Register in the “Description” field. If users
want to use the bit value of the Internal Register in the IF condition
setting, then please click on the rectangle at the right-side of “Bit
Nickname” field to set up the nickname for each bit of the Internal
Register.
