ICP DAS USA WinPAC-5000 Quick Start Manual Download

Page: 1 / 4

inP

-5

000 Quick

Star

Guide

Version 1.0.2, August 2012

Congratulations on purchasing Win PAC - the most popular automation solution for

remote monitoring and control application. This Quick Start Guide will provide

information needed to get started with WinPAC. Please also consult the User Manual

for detailed information on the setup and use of Win PAC.

In addition to this guide, the package includes the following items:

Win PAC Module

2 GB microSD card

Software Utility CD Screw Driver

(WP-5141/WP-5141-OD)

(1C016)

2.4 mm

●

WinPAC 5000 User Manual

CD:\napdos\wp-5000_ce50\Document\

●

WinPAC 5000 Website

•

WinPAC-5000 Quick Start Guide

Summary of Contents for WinPAC-5000

Page 2: ...at the switch is placed in the 0 position 2 Connecting to PC Monitor and Power Supply i Connect the mouse or keyboard to the USB port ii Connect the microphone and earphone to the microphone in and earphone out for WP 5141 OD only iii Connect PC to the Ethernet port through a hub iv Connect the power supply 10 30 VDC to PWR and GND terminals v Connect the monitor to the VGA port ...

Page 3: ...nPAC 5000 Quick Start Guide 3 Changing the User Interface Language The WinPAC Utility is a toolkit used to quickly control and manage the WinPAC Step 1 Run the WinPAC Utility located on desktop Step 2 Configure IP DHCP FTP Server Auto Execution etc Step 3 Save and Reboot the WinPAC ...

Page 4: ...n only supports XW board series modules For more information about the XW board expansion module please refer to http www icpdas com products PAC up 5000 XW board_Selection_Guide h tm After you have finished configuring your module s you may start to develop your own applications For detailed instructions and more applications please refer to WinPAC 5000 User Manual ...