ICP DAS USA VXC-1 8U Series User Manual Download Page 37

Page: 37 / 40

Serial Communication Board with 8 RS-232/422/485 Ports

- 37 -

5. Testing the

Multiport

Series Card

This chapter provides detailed information regarding the “self-test” process, which enables the user

to confirm whether or not the VXC-1x8U/PCIe-S1x8 series card is operating correctly. Before

performing the “self-test”, the hardware and driver installation must be completed. For detailed

information regarding hardware and driver installation, refer to

Chapter 3 Hardware Installation

and

Chapter 4 Software Installation

Preparing the device

Before beginning the “self-test”, ensure that the following items are available:



A DN-09-2 (optional) terminal board



A CA-9-6210 (optional) cable



A CA-0910F (optional) cable

5.1

Self-test Wiring

Step 1: Connect the DN-09-2 terminal board to the VXC-1x8U/PCIe-S1x8 series card using
the CA-9-6210 and CA-0910F cables.

VXC-118U/148U Card
PCIe-S118/S148 Card

Summary of Contents for VXC-1 8U Series







































Search results

Summary of Contents for VXC-1 8U Series

Reviews:

Related manuals for VXC-1 8U Series

Brands by name

Popular brands

ICP DAS USA VXC-1 8U Series, User Manual

Search results

Summary of Contents for VXC-1 8U Series

Reviews:

Related manuals for VXC-1 8U Series

Brands by name

Popular brands