Serial Communication Board with 8 RS-232/422/485 Ports
Copyright © 2015 ICP DAS CO., Ltd. All Rights Reserved.
- 26 -
4.4
PnP Driver Installation
Step 1: Correctly shut down and power off your
computer and disconnect the power supply, and
then install the VXC-1x8U/PCIe-S1x8 series card
into the computer.
For detailed information regarding installation of the
VXC-1x8U/PCIe-S1x8 series card, refer to
Chapter 3 Hardware Installation
Step 2: Power on the computer and complete the Plug and Play installation.
Note: More recent operating systems, such as Windows Vista/7/8 will automatically
detect the new hardware and install the necessary drivers etc., so Steps 3 to 5 can be
skipped.
Step 3: When the “Found New Hardware Wizard” is displayed, select
“Install the software
automatically [Recommended]”
option and then click the
“Next>”
button.
