Serial Communication Board with 8 RS-232/422/485 Ports
Copyright © 2015 ICP DAS CO., Ltd. All Rights Reserved.
- 21 -
4.2
Installing VXC-1x8U Series Driver
Follow the process described below to set up the software for the VXC-118U and VXC-148U card:
Step 1: Double-click the
“VXC_1x8_Win_Setup_xxxx”
application to install the driver.
Step 2: When the Setup Wizard screen is
displayed, click the
“Next>”
button to
installation.
Step 3: Select the folder where the drivers
are to be install. The
default path is
C:\ICPDAS\VXC-1x8
. But if you wish to install
the drivers to a different location, click the
“Browse…” button and select the relevant
folder and then click the
“Next>”
button.
