SMS-531 User’s Manual v1.1
- 45/60 -
5.4 Example 4: Sending the alarm voice
This example is shown how to send the defined voice alarm via the SMS-531.
1.
Setting the parameters by the GT-531 Series Utility
(1)
New and name an “Example4.prj” project in the Utility.
(2)
Set the Modbus address as 1 (the factory default address is 1).
(3)
Add 2 new phone groups and input phone numbers as follows:
(4)
Set the “Voice Alarm” fields as enable in Alarm Channel0 and Alarm Channel1 as
follows.
