12
2.6 Installing RMV-511
If users want to start RMV-511 normally, it needs to follow these steps to
install the RMV-511 below:
A.
Install the GSM antenna
B.
Plug in the normal SIM card (Before apply the SIM card, confirm it is OK by
mobile phone.)
C.
Pin08 and Pin09 connect to the DC.+VS and DC.GND of the power supply.
D.
Follow the section 2.4 to wire the I/O connection.
E.
If you want to use the backup power, please connect the Li-battery to
RMV-511.
