ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
217
11.2
THEN/ELSE Action Setting
To add a THEN/ELSE Action, please select and set the Action from the
dropdown list in the “Add a new Action” field under the THEN/ELSE
Action setting section.
ICP DAS Module
Modbus Module
Power Meter
Microsoft Azure
IBM Bluemix
MQTT
Timer
SMS Alarm
SNMP Trap
LINE Notify
Bot Service
Re-boot System
Reset modem
Data Logger
Rule Status
Internal Register
If the PMC/PMD is connected to ICP DAS XV-Board/M-7000/ DL I/O
modules, ICP DAS power meters or Modbus TCP/RTU modules, the setting
options for I/O channel information (AO
、
DO
、
Coil Output
和
Holding
Register) will be automatically displayed on the dropdown list.
To include subjects other than modules mentioned above in the
THEN/ELSE Action statement; they have to be pre-defined in Advanced
Setting first. The setting options of the subjects that already being defined in
Advanced Setting will appear on the dropdown list of THEN/ELSE Action.
Select the Action option from the dropdown list in the “Add a new Action”
field under the THEN/ELSE Action setting section, a window will pop up
for you to edit detailed information. The THEN Action statement will be
executed only when the result of IF condition statement is found “true”;
otherwise the ELSE Action statement will be executed. In order to meet
application requirement, for some Actions,
PMC/PMD offers options to
execute the Action one-time or repeatedly
. The setting options of
