ICP DAS PMC/PMD Series User Manual
93
DI Status Mapping: When “DI Status Mapping” is selected,
the status of the DI channel with the same channel number on
the XW-Board will be copied to the DO channel. For example,
when the “DI Status Mapping” is enabled on DO0, when the
DI0 status is ON, DO0 will set to be ON, and when the DI0
status is OFF, DO0 will set to be OFF as well.
After all settings of the channels are completed, click “OK” button to
return to XW-Board/XV-Board Setting page.
7.2.3
XW-Board/XV-Board AI Channel Settings
The XW-Board/XV-Board AI Channel Setting page is shown as follow
(using PMC-5151+XW310C as an example):
Figure7-21 :
XW-Board AI attribute setting page
The settings are as follow:
Nickname
:
For user to define nicknames for each I/O channel,
this nickname will be displayed on the “I/O Information” and
“Rule Setting” pages.
Type: Select the input signal type of the AI channel from the
dropdown list.
Scale: In the “Scale” field, AI channel raw data can be set to
operate with linear proportion between “MIN” and “MAX” values.
Summary of Contents for PMC series
Page 1: ...ICP DAS PMC PMD Power Meter Concentrator Series User Manual Version 3 1 8...
Page 51: ...ICP DAS PMC PMD Series User Manual 38 Figure5 32 Energy Usage Breakdown by Circuit Group Chart...
Page 72: ...ICP DAS PMC PMD Series User Manual 59 Figure6 11 Security setting interface of VPN function...
Page 165: ...ICP DAS PMC PMD Series User Manual 152 The Import of MQTT Topic...