ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
82
Figure7-15 :
PM-3133 Setting Page
The settings are as follow:
Nickname
：
For user to define nicknames for each power meter,
this nickname will be displayed on the “Power Meter
Information” and “Rule Setting” pages.
Description: The Description field provides a space for the user
to make a brief description of this power meter.
Address: The address will be the Modbus address of this
Modbus RTU power meter, please make sure the address setting
is the same as the settings of the module, if the setting is not
accurate, the connection for PMC/PMD to the power meter will
be failed.
Scan Rate: Input the time interval for PMC/PMD to periodically
retrieve the power data of this Modbus RTU Power Meter, the
setting range will be 0 ~ 65535 seconds.
Polling Timeout: The time interval for PMC/PMD to send
command to the Modbus RTU Power Meter and wait for the
response, the unit will be ms. The setting range will be 1-10000
ms.
Retry Interval: The time interval to wait for PMC/PMD to
repeatedly send command again when PMC/PMD sends
command to the Modbus RTU Power Meter and get no response.
The unit will be second. the setting range will be 3 ~ 65535
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
